VARATHANE 100

POLYURETHANE BASED FLEXIBLE LOW VISCOSITY CRACK INJECTION SYSTEM

VARATHANE 100 is a two part solvent-free, low viscosity high tensile strength polyurethane based system designed to form a strong permanent bond and seal in cracks in dry, damp or wet concrete and masonry.

Uses

For injecting into cracks for, dry, damp or wet concrete or masonry. Especially as an underlay for poorly ventilated working areas.
May be used to form bowl-shaped sealing layers around construction, since it adheres well to sand and concrete (wet or dry).
VARATHANE 100 is designed as a permanent solution to seal and bond cracks in concrete and masonry. Crack widths of between 0.2mm and 10 mm can be treated depending on requirements.

ADVANTAGES

Does not attack bitumen, sealing materials and foils modified with Bitumen or STYROPOR and PUR - Foam.
Even underwater,VARATHANE 100 provides very effective sealing, bonds with the above sealing materials and sealing foils.
Low viscosity allows penetration into fine cracks.
Good adhesion to dry/wet substrates.
High tensile strength, withstands high hydrostatic pressure.
Displaces water optimally.
Formulated to use in hot climates.
Flexible to withstand differential movement.

PACKAGING

VARATHANE 100 : 850 kg & 21 kg pack
VARAGEL EP : 0.75 kg. Pack.
VARASOLVE PS : 5 litre cans.